Biosafety cabinet negative pressure purification safety filtration experimental equipment
Product Description
Biosafety cabinets are biosafety isolation equipment used in biosafety laboratories or other laboratories. They are used to protect personnel, specimens and the environment. They can meet the operation of pathogens with risk levels 1, 2, and 3, BSC series biological safety cabinets belong to class II biological safety cabinets. The negative pressure air inhaled in the front opening area is used to protect the safety of personnel, and the vertical air flow through the high-efficiency filter (HEPA) is used to protect the safety of the tested samples. The exhaust air is filtered by a high-efficiency filter to protect the environment from pollution. BSC series biological safety cabinets are designed and produced in strict accordance with JG170-2005 and YY0569-2011 and other standards. In addition to the usual floating layer analysis and particle counting methods, the performance of biological safety cabinets is also evaluated by microbial methods.
Technical parameters
Model BSC-1300ⅡA2 BSC-1300ⅡB2.
Cleanliness class ISO5 class (100 class).
Filter grade/filtration efficiency HEPA/ULPA ≥99.995～99.999% @0.3μm.
Average flow of downdraft (m/s) within the range of 0.25 to 0.40.
Average flow of inflow air (m/s) ≥0.5.
Noise dB(A) ≤67.
Vibration peak μm ≤5.
Power AC single-phase 220V/50Hz.
Airflow Balance Biological Protection Personal Protection:
a. The total number of colonies in the impact sampler: ≤10CFU/time.
b. The total number of colonies in the slit sampler: ≤5CFU/time.
Product protection 1-8CFU/ml (repeat 3 times, 5min/time).
Total number of colonies: ≤5CFU/time.
Cross-contamination protection 1-8CFU/ml (repeat 3 times, 5min/time) Total number of colonies: ≤5CFU/time.
Maximum power (KV·A) ≤1.5 (including spare socket).
Weight (kg) 270/280.
Work area size W*D*H (mm) 1300*520*640.
Dimensions W*D*H (mm) 1465*760*2200.
Fluorescent lamp specification and quantity 30W*2pcs.
UV lamp specification and quantity 18W*1pcs.
Illuminance (Lx) 650.
Supply and exhaust pipe diameter (mm) Φ250 Φ250.
Air outlet direction Eject out Eject in, eject.
Remarks This product can be customized according to customer needs (such as: material, size, etc.).
Detail drawing
Related products
-
Air volume control valve
Features: 1.The size of the joint of the split multi-leaf air volume control valve is the same as the size of the rectangular air duct stipulated by the national ventilation duct standardization. 2.The blades of the air volume control valve are of the split type and the open type, and are used as control valves in ventilation, air conditioning and air purification systems. 3. The air volume control valve has good air tightness and good adjustm...
-
Local sterile environment in negative pressure ...
Product Description The negative pressure weighing room is made of high-quality 304 stainless steel by bending, welding and assembling. High flatness, easy to clean. The electrical cabinet can be selected in two ways: built-in and external. The air outlet surface is made of polymer uniform flow membrane, the uniformity of wind speed is controllable, and the primary, middle and high efficiency filters can be disassembled and replaced from the f...
-
Laminar airflow trolley free mobile PLC control...
Product Description The clean laminar flow vehicle is a one-way flow type local air purification equipment. It is equipped with a special rechargeable power supply, which is not limited by the location of the power supply. It is convenient to move and turnover products. Vertical flow: under the action of the forced draft fan, the fresh air is initially filtered by the primary efficiency filter, and then secondary filtered by the high efficienc...
-
Clean laminar flow hood provides local clean en...
Product Description After the air is filtered through the high-efficiency filter at a certain wind speed, it passes through the damping layer to equalize the pressure, so that the clean air is sent to the work area in a one-way flow, so as to obtain the flow pattern and cleanliness required by the work protection area. The laminar flow hood can be used individually or in combination, and its work area is a sterile core area. The clean laminar ...
